PDA

View Full Version : Air scribe?


Bulltear Ad
Bulltear Ad

f_armer
03-24-2014, 10:21 AM
Adding an air scribe would be nice, I haven't been able to find much info on mounting one on a Bulltear table.
You did mention somewhere you were working on one, do you have a kit?
Do you have pics of one mounted? Are the mounting points behind the Mag Lok (the slots with the 3 threaded holes on each side) something to do with the scribe setup?
Thanks

jeepsr4ever
03-24-2014, 04:07 PM
Kit will be available soon. We keep getting components from different vendors to see who can supply quality and consistancy. There is a great build up that was done cheaply by one of the first guys to have a 2012 system back in late 2011. His name is RalfXJ here on the board. Look him up he can give you all the part numbers and info.

_Ogre
03-25-2014, 01:59 PM
i'm setting a scribe up on our table right now. i have $80 in it so far. needed to order a regulator for down pressure, it should be here in a couple of week (from china). once i get it working, i'll post up my results in my thread.

f_armer
03-25-2014, 04:54 PM
Sounds good, looking forward to see what you came up with.

_Ogre
04-16-2014, 07:01 PM
f_armer: check my build thread for info on my $100 scribe setup
price went up because i added a $10 air regulator for down pressure :-s

Bulltear Ad