PDA

View Full Version : order 4417


Bulltear Ad
Bulltear Ad

rejeep
04-10-2014, 06:43 PM
quick question...
the matched distrib and cam gear set I purchased is a bit askew..
distrib gear not drilled correctly, wont go on shaft...

is there something I'm missing?

jeepsr4ever
04-10-2014, 06:46 PM
AMC distributor holes are drilled to .491 (that is OEM spec). AMC distributor shafts are .490. If you using this on a chevy conversion distributor it wont work without alot of work. What distributor are you trying to put this on? What brand and type? If its a ProComp your shit out of luck nothing AMC will fit.

rejeep
04-10-2014, 07:12 PM
cardone reman..

make a suggestion on what to buy and im all over it.. I didnt want to run an HEI

rejeep
04-11-2014, 11:39 AM
from a little research I found out that distrib gears when offered from AMC where not drilled all the way through.. since this has a through hole am I expected to open up the hole in the distrib shaft?

Im just trying to make this all work so I don’t run into issues..

Bulltear Ad