PDA

View Full Version : ATTN Star-Lab owners and Folks with HD units from 11-1-2011 to 2014 (auto-square function)


Bulltear Ad
Bulltear Ad

jeepsr4ever
12-10-2014, 10:50 AM
Their is a new auto square limit switch assembly kit available for your units shortly. This assembly has 3 switches that combined will auto square the gantry and give you a X and Y home. This will enable the ultimate reference point for restarting or enabling production sheet cutting (Easy loading feature). All of these switches are VERY adjustable and easy to install. You must know that your A axis must be homed polar to your X and your A axis will need its motor tuning for it to work. If you are confused call in 1-855-433-3689.

Kit includes 4 switches, 3 switch brackets (X, A and Y axis), 2 axis hard stop brackets with adjustable bolts (X and A axis), wiring and female clips for attaching to your table I/O board. Pricing soon

Two of these brackets (one side has a home and a limit switch)

430
This is how they are implemented
431
Other side of the gantry
432
The Y axis on the Star-Lab is shown here. HD system owners 11-1-2011 to 2014 (not shown but available)
433

jeepsr4ever
06-15-2015, 12:37 PM
Folks have been adding these

Bulltear Ad