View Full Version : PCV Grommet
Wagonmaster22
01-15-2015, 08:51 PM
Gents,
Perchance, might anyone have the dimensions of the PCV grommet in the left side valve cover on the 360/401?
Mine has disintegrated and need a new one of which there isn't enough left to determine anything.
Thanks for any assistance here,
tufcj
01-15-2015, 08:57 PM
Welcome to Bulltear.
The PCV was never in the valve covers of any 360/401 from the factory. It's at the back of the intake manifold, toward the passenger side. If there's a PCV in the valve cover, a prior owner has put it there. It's probably not a good idea, unless they added some sort of baffle inside the valve cover. Without a baffle it would suck oil from the rockers.
Bob
tufcj
Wagonmaster22
01-15-2015, 11:39 PM
Thanks Bob.
It looks like I have a custom setup from a previous owner utilizing a chrome baffled cap (snapped into the OEM grommet) with an in-line PCV plumbed to the base of the carb. I need that grommet that fits the valve cover which I believe to be the original.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.