PDA

View Full Version : Star-Lab CNC Maintenance


Bulltear Ad
Bulltear Ad

jeepsr4ever
01-20-2016, 03:08 PM
Linear rails should be greased every 50 hours on the Y axis and every 200 hours on the Z axis. Ballscrew every 200 hours.

Specific grease fitting for Y axis linear way trucks

http://www.toolsource.com/lube-link-push-coupler-quick-connect-p-144782.html

X axis rails should be wiped with cloth damp with WD40 twice weekly

Motoguy
01-29-2016, 07:13 AM
For those of you who are Amazon/Prime addicts, like myself...

https://www.amazon.com/dp/B003V5JICW/ref=cm_sw_r_sms_awd_nu2QwbY1GAKEP

tylerd
06-22-2017, 12:17 AM
What type of grease should we be using?

jeepsr4ever
06-22-2017, 11:29 AM
Just Standard grease. Do not use any high end grease as some might have a PH that is not neutral.

tylerd
09-01-2017, 06:20 AM
The Grease that my table came with is red, would Lucas Red & Tacky #2 work, or something more robust like either of these 2.... https://www.amazon.com/Red-Line-80402-Synthetic-Grease/dp/B000CPAEJA or https://www.amazon.com/DuPont-Teflon-Grease-Cartridge-14-Ounce/dp/B003UTZ4SG/ref=sr_1_5?s=automotive&ie=UTF8&qid=1504268186&sr=1-5&keywords=Red+synthetic+grease

Just want to get something close or compatible with what was already used!

Thanks!

jeepsr4ever
09-28-2017, 02:30 PM
No special grease needed.

Bulltear Ad