PDA

View Full Version : Need one of these? dana 44 front for cj7-5

Bulltear Ad
Bulltear Ad

jeepsr4ever
09-09-2003, 09:51 PM
i can get em all day long!


http://www.imgbay.com/sites/jeepsr4ever///im0099.jpg
Mudrat
09-28-2003, 03:47 PM
Jeeps, you need to cut down on the size of pic a bit. I have to scroll both up/down and sideways ALOT to try and see what your saying

Mudrat :lol:
jeepsr4ever
09-28-2003, 03:49 PM
ok
78304CJ-7
10-02-2003, 12:57 PM
What do you want for one? Habe you cut them down already?
jeepsr4ever
10-02-2003, 02:17 PM
yeah still got the one in the pic, its a waggie 44 cut down for cj widetrack, asking $135 for the housing, need to get it out of here, all holes are chased with a tap and the cover mounting surface has been scotchbrited, i will crate it,,,,interested? Soo many deals on this axle fell through...i dont understand it!!
78304CJ-7
10-02-2003, 02:47 PM
Intrested yes, I am NT though. Gotta look in my pile of RP gears to see what i have. Have any 3.73's? I think all I have are 4.98's Gotta check though I bought a pile of them for cheap from a guy who was moving thinking someday I will have a 44 up front. Think you can weld pirches on it for SOA?
jeepsr4ever
10-02-2003, 02:51 PM
I could weld purches on it, but it would be extra! What ratio's do you have, i need a set of 4:56's BAAADDDD!! I would weld the purches on top for a set
78304CJ-7
10-02-2003, 02:58 PM
I will look to see what I have they maybe 4.56's How many teeth are on the pinion gear and I can tell you tonight if I have one. Still that 44 is WT that is gonna look a little funny !
jeepsr4ever
10-02-2003, 03:01 PM
78 it is cut down for use with 30 or 44 knuckles and the end result is a widetrack CJ size not waggie
78304CJ-7
10-02-2003, 03:21 PM
I think I understand. However there is WT CJ and NT CJ correct. After I think 81 they went WT CJ, yes? I know I had to order NT axles when I installed my one piece shafts in my AMC 20. Am I confused, like I said I am by no means axle savvy.
jeepsr4ever
10-02-2003, 03:23 PM
hey yeah the widetrack came after 81 some 82's still had narrows, the widetrack really looks acts great under a jeep, i also have a narrow track dana 44, set up for spring over for sale, asking $150 for that one, with all brake line from the frame to the wheel cylinder
fuzz401
10-02-2003, 04:26 PM
Ring & Pinion Sets Part #
Teeth
Ratio

AM20-273 30-11
2.73

AM20-308 43-14
3.08

AM20-331 43-13
3.31

AM20-354 39-11
3.54

AM20-373 41-11
3.73

AM20-410 41-10
4.10

AM20-456 41-9
4.56
78304CJ-7
10-02-2003, 04:53 PM
Hey fuzz, do you have those for the Dana 44? I got some of both and am trying sort thought them as I find them.
78304CJ-7
10-02-2003, 04:58 PM
Oh yeah, MC, is that with a RP or at least a carrier? Do most of the RP kits come with all the shims and that jazz to set the lash?
fuzz401
10-02-2003, 05:47 PM
if you get the full kit it should have - bearings - shims - seals -marking compound - new pinion nut

the only gears i would have for a 44 would be 3:54 or 3:73
model 20 - 3:54
78304CJ-7
10-02-2003, 07:02 PM
fuzz you still runnig that AMC 20 behind ur 401?
fuzz401
10-03-2003, 08:25 AM
no when i split the carrior in it i went to a 44 from a 74 to 76 44 out of a cj and still running it when it goes i will eather rebuild the 44 or 20
Bulltear Ad