PDA

View Full Version : Using a old AMC intake on your newer one.......PICTURE


Bulltear Ad
Bulltear Ad

jeepsr4ever
09-16-2003, 09:43 PM
you will need to move the holes up and in, to reference this look to an intake gasket. The middle 2 holes on both sides of the gasket are slotted. Here is a R4B intake i modified to fit 71-later dogleg heads. Now it will fit all years. Kinda cool mod! You can pick up a old R4B from ebay.com for around $250-$400 they are a med rise HUGE PORT 360 degree dual port intake.....WHEW!!!

http://www.imgbay.com/sites/jeepsr4ever///stuff0001.jpg
http://www.imgbay.com/sites/jeepsr4ever///stuff0002.jpg

FSJnovice
03-27-2004, 07:42 PM
I will ask for help on this one, measurements and difficulty scale. :!:

jeepsr4ever
03-27-2004, 10:08 PM
Its relatively easy, take a intake gasket and mark the slot and drill away...LOL Really all the intake gaskets will have te slot where the center bolts run (2 on either side)

ironroad 32
03-14-2005, 08:51 PM
i thought the r4b's had smaller ports than the performer

jeepsr4ever
03-14-2005, 08:59 PM
Your thinking of the sp2p

jeepsr4ever
03-14-2005, 09:00 PM
The

ironroad 32
03-15-2005, 05:04 AM
ahhh thank you ol great one ,,lol

jeepsr4ever
03-15-2005, 01:15 PM
Thank you for not saying "thank you OLD great one" :?:

Bulltear Ad