jeepsr4ever
09-29-2003, 01:33 PM
Look at that thing its the UR-18 tunnel ram for AMC V8's...what a piece!
http://www.imgbay.com/sites/jeepsr4ever///tunnelram.jpg
http://www.imgbay.com/sites/jeepsr4ever///tunnelram.jpg
View Full Version : Edelbrocks finest for drag racings AMC V8's
78304CJ-7
10-03-2003, 12:03 PM
saw that one one ebay wonder what it went for?
jeepsr4ever
10-03-2003, 01:46 PM
me 2
jpnjim
11-26-2003, 05:49 PM
I really need one of these :D
I went to an AMC show about 10 years ago, there were 3, or 4 guys with new in the box ones, going for $300-350 each.
I really should have bought one.
I went to an AMC show about 10 years ago, there were 3, or 4 guys with new in the box ones, going for $300-350 each.
I really should have bought one.
jeepsr4ever
11-26-2003, 05:53 PM
yeah they are nice.....i wonder what kind of camshaft you would need to support one of these
73hornut
11-26-2003, 06:39 PM
The ur-18's I've seen on ebay are going for $750-$800. Ive seen cross-rams for $450.
jpnjim
11-30-2003, 12:06 AM
The ur-18's I've seen on ebay are going for $750-$800. Ive seen cross-rams for $450.
If you see a crossram for $450, buy it!
I paid ~$300 for mine, but have seen them for $1000+
If you see a crossram for $450, buy it!
I paid ~$300 for mine, but have seen them for $1000+
Lifted79CJ7
12-14-2003, 06:31 PM
For $1000+ I wuld buy the tools to make one myself. Some peeps aren't real smart with their money... :razz:
Jack
Jack
Holeshot
01-31-2004, 01:29 PM
That would be the day - make one yourself!!! :!:
I bought my first one on Ebay a couple of years back, around $1100 with a pair of Holley 450 Vac Sec carbs and linkage. I sold the carbs for around $400, bought a pair of Holley 660 "Center Squirters", and this setup made my 520HP 390 (had a Torker on the dyno) SCREAM even more!!!
Dyno2000 says the Torker is nearly as good. VERY close.
Throttle response and awe factor is WAY more with the UltraRam.
http://www.american-powersports.com/dave/image/amx/x_2x4.jpg
The second one I got was $450 with shipping. It was milled for the "ProStock" heads and had "Wally Booth" stamped into the carb mounting flange. Only way to fit it to "normal" heads would be to fab a pair of .375" plates to go between a pair of intake gaskets. I offed it pretty cheap.
STR-11s are going for a price that I don't want to propagate! I want one and will be having one! (they are only worth a few hundred) :?
http://www.american-powersports.com/dave/image/amx/tech/str11.jpg
I bought my first one on Ebay a couple of years back, around $1100 with a pair of Holley 450 Vac Sec carbs and linkage. I sold the carbs for around $400, bought a pair of Holley 660 "Center Squirters", and this setup made my 520HP 390 (had a Torker on the dyno) SCREAM even more!!!
Dyno2000 says the Torker is nearly as good. VERY close.
Throttle response and awe factor is WAY more with the UltraRam.
http://www.american-powersports.com/dave/image/amx/x_2x4.jpg
The second one I got was $450 with shipping. It was milled for the "ProStock" heads and had "Wally Booth" stamped into the carb mounting flange. Only way to fit it to "normal" heads would be to fab a pair of .375" plates to go between a pair of intake gaskets. I offed it pretty cheap.
STR-11s are going for a price that I don't want to propagate! I want one and will be having one! (they are only worth a few hundred) :?
http://www.american-powersports.com/dave/image/amx/tech/str11.jpg
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.