Fender Chop

[pyagid]

Before:
http://www.yagid.com/pic/jeep/DSC01193.JPG

After:

http://www.yagid.com/pic/jeep/DSC01194.JPG http://www.yagid.com/pic/jeep/DSC01195.JPG


I am looking for a set of TJ flares to add to the front and rear as well. For now I think I will leave it with the flares off

[jeepsr4ever]

Nice job, was a grinder with a cut off wheel is what you used?

Almost all guys who do the reverse shackle cut their fenders with a tool or their tires....LOL

Looking good!

[Tigger]

I don't see a Shackle Reversal on there or am I wrong, those look similart to the HD shackles I had on my YJ for a while.

But how did you do it? I have a set of TJ flares sitting here that I need to get on before I get a ticket.

[jeepsr4ever]

no he doesnt have a shackle reversla there, Take the flares and mount them up using a set of vice grips, you can drill a small pilot hole and use screws, this is a quick way i mount flares

[pyagid]

I just cut it with a sawzall and then finished it smoother with a grinder and file. ALthough today my tire hit and bent the marker light flat againste the bottom...........I guess I need to cut a little more off :D and no shackle reversal yet. May do one after the SOA but am still debating on that

[jeepsr4ever]

wow you still hit? you have more flex than florida jeeper......LOL sorry Frank

[pyagid]

wow you still hit? you have more flex than florida jeeper......LOL sorry Frank

this is the point where it rubbed or a little further through that section but then again i don't think i have any bumpstops

http://www.yagid.com/pic/trailrun/NM/cjflex640.jpg