View Full Version : steering box
fuzz401
10-29-2003, 10:03 AM
looking for a manual steering box and mounting brackets and shaft from box to column
and a rod from brake pedal to master cyl for manual brakes
jeepsr4ever
10-29-2003, 10:18 AM
gees where were you last spring.....LOL i had 3 of those items, let me check here fuzz
fuzz401
10-29-2003, 10:21 AM
thinking power steering might be a little to senative and not enought vacum for the brakes 800 rpm 5 to 7 vac lol
pyagid
10-29-2003, 11:21 AM
I may have a steering box and the shaft off a 70's CJ-5 I will have to check...Will this work??? I am also looking for a Powersteering box in good shape
Floridajeeper
10-29-2003, 08:21 PM
Hey fuzz...got a PS pump bracket that'll fit the AMC 4 cyl?
If so...I can install my PS and send you the old box... :wink:
Now the brake pedal rod I couldn't help with until I get my Cadillac power brakes installed on the Scrambler...but I need to modify the Caddy's old rod to do that...so I haven't moved that job up on the list of things to do... :?
fuzz401
10-30-2003, 06:56 AM
no dont have a 4 cyl ps bracket
pyagid
10-30-2003, 07:02 AM
Fuzz will one of a early to mid 70's Cj-5 work for you? I will snap a picture tonigh. it is at a friends house and i thought i remember it loooking a little different than the one on my 7. Just let me know. I don't know how far you are from philly but my bro is going to be down there from Sunday till Tuesday if it is close enough for you to pick it up from him
fuzz401
10-30-2003, 07:06 AM
i dont know if it will fit or not
pyagid
11-05-2003, 07:13 AM
pm'd you
jeepsr4ever
11-05-2003, 07:22 AM
i got a power box sitting here, can you use that fuzz?
fuzz401
11-05-2003, 08:03 AM
have power steering now looking at manual that way it is not a quick on take off lol
Kornchild
11-05-2003, 09:42 AM
I may have a manual box of my commando. If you had a Saginaw setup then you will be fine ast he box will bolt on, but you will also need a different pitman arm, the manual box uses a different spline count then the power box....
jeepsr4ever
11-05-2003, 12:56 PM
Fuzz quit drag racing that jeep :thumbleft:
fuzz401
11-05-2003, 06:59 PM
Fuzz quit drag racing that jeep
not yet have to see what it will do :D
jeepsr4ever
11-05-2003, 07:04 PM
you know what it will do fuzz....twist that rear driveshaft like it was made out of butter, crack your T-case and chip your pinion teeth, who is talking you into this man....LOL
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.