PDA

View Full Version : Official driveshaft post


Bulltear Ad
Bulltear Ad

jeepsr4ever
11-28-2003, 12:10 PM
Here is what i have currently they are $35 each plus shipping, in collapsed lengths

front

20.5"
27"

Rear

23"
27.375"

No CV's this week

Mudrat
04-23-2004, 10:39 AM
MC
Do you have any long splined slip fittings? I'm going to try and convert my existing yokes for the CJ, but with the SOA, spring reverse (yada-yada-yada)articulation, I think i'll need some longer splined tubes ???

Mudrat :?:

Lifted79CJ7
04-23-2004, 07:53 PM
I just found out about a guy that redoes some Waggy CV driveshafts for $110 shipped ($80 for the shafts and $30 for shipping). Includes retubing, new joints, but no long slip. Let me know and I can send you the info.
Jack

Mudrat
04-24-2004, 06:24 AM
Go ahead and post it - others may need the info - and a CV up front probably wouldn't hurt :wink:

Mudrat

jeepsr4ever
04-25-2004, 10:10 AM
Jack I am interested as I run those style driveshafts...I dont have any more time to make my own and I swap axles 3 times a year

Mudrat
04-25-2004, 10:48 AM
...I dont have any more time to make my own and I swap axles 3 times a year

Aren't they cheaper to rebuild :wink: :?

Hows your DJ project coming? (http://www.bulltear.com/forum/viewtopic.php?t=1297) Haven't seen much there in a while ...

Mudrat

jeepsr4ever
04-25-2004, 11:13 AM
I am negotiating a blocks right now...still stock

BRAD ARTHUR
06-17-2004, 08:09 PM
who builds the cv shafts and how can i get ahold of him?

jeepsr4ever
06-17-2004, 09:48 PM
Brad, PM tigger on shafts

Lifted79CJ7
06-18-2004, 12:47 AM
I believe his AIM is MYHEEP and his email address is MYHEEP@AOL.COM if I am not mistaken. If my poor beer loaded memory serves me right tonight his name is Luke. Shoo, I will doublecheck into it...
:razz: :razz: :razz: Jack :razz: :razz: :razz:

jeepsr4ever
06-18-2004, 05:24 AM
Jack have you been drinking? You mean Ron from TAPoffroad.com or "tigger"?

:razz: 111!!!


111!!! #-o

Lifted79CJ7
06-18-2004, 09:53 AM
Oh man was I drunbk last night. I have the poops today to prove it! :shock: :smile: :oops: Anywho, Is that Tigger's info? Crud. I will track down my friend and see what the guys contact info is again.
Jack

401
09-13-2004, 08:03 PM
111!!! Do to the undesirable interest in the post modification of the defamation of the drive shaft simulation, it may be necessary to point out the inevitable possibility that the probability of the mode of failure when modifying a Wagoneer, big and powerful into a smaller more agile CJ5, that the drive shaft although mighty and strong, will preferably need a little shrinking action to accommodate the more petite CJ, and most possibly never fit. Aint that right MC?

jeepsr4ever
09-14-2004, 06:26 AM
Larry after watching you beat on the lathe chuck trying to straiten a driveshaft.....i concur 8)

Mudrat
03-20-2006, 09:27 PM
MC what's your stock look like?

Running lengths are about:
Rear - 24.25
Front - 33.25

I'll need to get the tape out and remeasure, but that's close.

Also, Need some front shocks 13" travel (-6, +7) with a 23" running height.

Anyone? Anyone? .. Bueller?, bueller?

Pat

Lifted79CJ7
03-21-2006, 11:23 PM
Pat. my old front driveshaft I cut down tthat I used in the rear is 24.5". Let me know if interested - has brand new u joints in it. It's the smaller shaft, but at the very least would make a great spare.
Jack

Mudrat
03-22-2006, 06:07 AM
Pat. my old front driveshaft I cut down tthat I used in the rear is 24.5". Let me know if interested - has brand new u joints in it. It's the smaller shaft, but at the very least would make a great spare.
Jack
Running length is 24.5? :-| That's my rear length sitting in the shop.
Front is 33.25 sitt'n still.

Bulltear Ad