PDA

View Full Version : Dana 18 Input gear.


Bulltear Ad
Bulltear Ad

78304CJ-7
12-19-2003, 03:54 AM
I need the input gear from a Dana 18 must be 29 teeth, 6 splines, with a 1.375‚Δω shaft. Anyone????

MC you gotta have one somewhere 8)

-RJ

jeepsr4ever
12-19-2003, 08:47 AM
i can get you a new one for just over cost in jan if you can wait till the middle of jan!

I dont have a case i want to tear apart or a bullgear

78304CJ-7
12-19-2003, 02:19 PM
What kind of green we talking here..... I guess i acutally need some other gears as well.. I want to convert one of my D20 to the lower range I happened upon a Broco D20 so I am half way there. I guess I need some more gears I gott take the thing aprt to see what I have... I was looking at this :

http://www.jeeptech.com/convxfer/2.46-20/

and this:

http://www.off-road.com/~jweed/transfer.htm

Let me know...

-RJ

fuzz401
12-19-2003, 06:31 PM
i have some old cases around would have to look and see what i have will look next week

mrtazwrench
12-19-2003, 08:49 PM
I HAVE A CASE ON A 3SPD FROM A 74 CHEROKEE, WOULD IT HAVE ANYTHING YOU NEED?

78304CJ-7
12-20-2003, 04:05 AM
Fuzz let me know.... there area few gears I need apparently.

mrtazwrench, I think that would be a D20... not sure though, is there a drum brake on the back of the T-case?

Does it look like this?


http://www.jeeptech.com/xfer/d18front.jpg

http://www.jeeptech.com/xfer/d18back.jpg

Easy way to tell, is the rear dif centered Cherokee..... I am pretty sure that will be a D20 already got two of them.

Mudrat
12-21-2003, 04:48 PM
I guess I need some more gears I gott take the thing aprt to see what I have... I was looking at this :
http://www.jeeptech.com/convxfer/2.46-20/
and this:
http://www.off-road.com/~jweed/transfer.htm
Let me know...

-RJ
I like te "Almost painless" caveate :shock:

Mudrat :razz:

78304CJ-7
12-24-2003, 01:41 PM
Yeah.... so far not too bad. I need two gears to compleate the conversion:


18 8 23
18 8 22

MC I know they can be had aftermarket let me know if you can get them and I will send some money your way. Good used ones work too 8)

-RJ

jeepsr4ever
12-24-2003, 02:24 PM
I will be able to get them cheap new in jan untill then you may find one of these guys have a used set..........but if you can wait i will order them for you in jan :(:

78304CJ-7
12-24-2003, 04:01 PM
MC sounds fine with me, I'm not in any huge rush to do this. When in Jan, like in a week or 5 weeks? Let me know as this has been a fun project and I look forward to working on it besides it is taking up valuable space on my bacement floor :!: .

I need to get my 401 out and start working on it. Then I gotta get my NV4500 going.

jeepsr4ever
12-24-2003, 04:07 PM
BASEMENT FLOOR :shock: ............... :mrgreen:

2nd week in jan my man :sa:

78304CJ-7
12-25-2003, 12:18 PM
Yeah the floor, so many things going on, T-18 apart, one t-150,two D20's apart, 304,360,401 3 sets of heads (not including the long blocks) ...... and the list goes on... Oh yeah mildon oil pan, offy covers, few intakes, 3 401 cranks, 2 sets of 401 rods, lp2381 forged pistons (used .030 over if someone is intreested) I am sure I missed alot of stuff not to mention all the tools.....you get the point it is a "jeep" thing after all.


Merry Christmas all


-RJ

jeepsr4ever
12-25-2003, 05:04 PM
I am always looking for 401 stuff, let me know what and how much

78304CJ-7
12-25-2003, 06:14 PM
Well if you need anything let me know... .Like I said I got about a spare everything but a block, and well if I get a good tax return aluminum (block) is in the future..... but all depends on uncle sam. I am not looking to sell any of it but I know you are an AMC diehard like myslef and other here (fuzz) and I am always looking to further the cause.... if you need something let me know I alway want to help a brother out... especially when I have been drinking (like now 8) ) You are there to further the AMC/Jeep cause and not make a quick buck off it, trying to make a living yes, but not out there to screw Joe Smoe and for me that goes along way.... ok I gotta go to bed. :razz:


tooooooooooooooooo many beers :!:


-RJ

thigh19
06-05-2004, 02:49 AM
Talk to Ryan at http://www.the-jeep-guy.com/

tufcj
06-08-2004, 08:17 AM
There's an 18-8-23 on ebay this morning....

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=34208&item=7904422948&rd=1

Bob.
tufcj

78304CJ-7
07-08-2004, 10:54 AM
Thanks I picked one up along time ago, and actually no longer own the T-18/D20 combo. PLans are now NV4500 D300 combo. :t:

-RJ

Bulltear Ad