PDA

View Full Version : Full Size Knowladge needed


Bulltear Ad
Bulltear Ad

pyagid
01-15-2004, 01:44 PM
Could some one tell me if the following Vehicles would be d44 front and rear? If the rear would be offset? or centered and would the front have a vaccum disconnect?

Basically I am just wondering what the obtions for axles were for these 2 years. My dad is thinking 44 front and rear and spare motor to rebuild for his jeep

Thanks
Paul

1981 JEEP GRAND CHEROKEE
Golden Eagle, 360-V8, 90,000 original miles, rusty, runs strong, $350 OBO.



1983 JEEP WAGONEER
4x4, 80K mi, runs good, needs minor work, $250.

jeepsr4ever
01-15-2004, 02:41 PM
both will have centered amc 23's and drivers side dana 44's 727's for autos

AlaskaJeepR
01-18-2004, 09:12 PM
Man, that MC sure is smart !:idea:

jeepsr4ever
01-18-2004, 09:23 PM
ok what do you want :mrgreen:

pyagid
01-19-2004, 10:07 AM
Ok what about out of under a 1977 Cherokee Chief???

http://www.yagid.com/avatar/paulsig.gif

jeepsr4ever
01-19-2004, 10:17 AM
360 th400-quad

401 th400 quad

304 t150 dana 20

or 304-401 t18 dana 20

all dana 44 rear if offset then quads

front is a passenger side drop on all

pyagid
01-19-2004, 10:50 AM
Man, that MC sure is smart !:idea:

Yeah

Thanks. This one has a 401 in it. SO it woudl have and offset rear then I guess. Doh. :-|

jeepsr4ever
01-19-2004, 11:17 AM
really depends on if it has a manual or auto, manual strait rear 44 or auto th400-quad offset 44

pyagid
01-19-2004, 02:47 PM
really depends on if it has a manual or auto, manual strait rear 44 or auto th400-quad offset 44

Yeah it is an auto I ment to put that in my last post as well

jeepsr4ever
01-19-2004, 02:53 PM
yup a quad offset rear pass front 6 bolt 30 spliners, th400 and a lift gate that prolly doesnt work..LOL :mrgreen:

pyagid
01-19-2004, 02:59 PM
i am sure there is more than that, that does not work

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2454462799&category=6286




http://i20.ebayimg.com/02/i/01/2e/5b/f4_1.JPG


He wants to much for it IMO he also had a researve on it last night. But i thought the 401 would be good to build for my CJ so I emailed him a lower offer. For what those go for around here in better shape than that

jeepsr4ever
01-19-2004, 03:28 PM
what planet does a core 401 go for 1200

junkyard jim
03-06-2004, 01:41 PM
360 th400-quad

401 th400 quad

304 t150 dana 20

or 304-401 t18 dana 20

all dana 44 rear if offset then quads

front is a passenger side drop on all

Just poking around old posts and spotted a slight faux pas. '72 and '73 were the only years a 304 came stock. Doesn't mean someone (like me) didn't put in a 304 though! :? 258 was also available from '72 to '88. (Some day, I will find myself a decent '91ish GW and put in a 4.0L drivetrain and make it look bone stock! That's what I am currently doing with my '84 J10)

jeepsr4ever
03-06-2004, 04:09 PM
:t:

Lifted79CJ7
03-06-2004, 07:21 PM
Amen brother! Preach it like it is!!

Lifted79CJ7
03-06-2004, 08:00 PM
Oh, you haven't been to YoMamaLand then, have ya? Right past pluto on the left. Sheesh, do I need to draw a map??? 8)

Bulltear Ad