cjmike67
02-05-2004, 10:22 PM
Comp cams has advised me to use push rods that are 150 thou longer then factory to use there 1416-16 roller tip rockers on an otherwise completely stock 304 ! These heads are the ones with factory rocker studs ! The stock rockers are a little bit more open on the base of the rocker as compared to the comp rockers ! Should i replace the studs with aftermarket ones?? Do i believe comp when they didnt seem to REALLY know what the problem was?Any help would be great as this engine has to be running for me to sell it asap! thx in advance Mike :-|
