ok so i am going to post some pictures of the couple sets of cam and dizzy gear that got chewed up in my motor. I know that oilling was not the issue because i had between 40psi at idle and 80psi at high rpm and i had the little hole drill above my dizzy for extra oiling
http://i43.photobucket.com/albums/e3...izzyoiling.jpg
so my question is what else could have caused this. if i order the matched cam gears and new timing cover from bulltear will that fix it? i use a msd dist ( the amc style one).
http://i43.photobucket.com/albums/e3...g/IMG_0047.jpg
http://i43.photobucket.com/albums/e3...g/IMG_0048.jpg
http://i43.photobucket.com/albums/e3...g/IMG_0049.jpg
http://i43.photobucket.com/albums/e3...g/IMG_0050.jpg
these two were a set both amc brand gears
http://i43.photobucket.com/albums/e3...g/IMG_0051.jpg
http://i43.photobucket.com/albums/e3...g/IMG_0052.jpg
http://i43.photobucket.com/albums/e3...g/IMG_0053.jpg
http://i43.photobucket.com/albums/e3...g/IMG_0055.jpg
http://i43.photobucket.com/albums/e3...g/IMG_0056.jpg
http://i43.photobucket.com/albums/e3...g/IMG_0057.jpg
http://i43.photobucket.com/albums/e3...g/IMG_0058.jpg
and these two were a set the dizzy gear was msd and the other one cam with the motor
the first set lasty say 5 or 6 pass down the track and the second last 10 -15 can exactly remeber
i hope you guys can give me some help in figuing this out
thanks justin