Well Im out. My wife changed it all up on me. Shes flying to KY by herself this weekend. So I hope you sell them to someone who cares :razz:
Printable View
Well Im out. My wife changed it all up on me. Shes flying to KY by herself this weekend. So I hope you sell them to someone who cares :razz:
I took a piece of 2.5 ID/3.0 OD .250 thick tube, split it long ways, leaving a small gap, and wrapped it around my AMC 20 tubes. Clamped the tube around the 20, welded the seams and 20 tube together with my mig. Used nickel rod and arc welder to attach tube to center section. You can also put a couple of rosset welds in there. Ground down the welds, and you can't even tell anything was done. Use new spring perches for 3 inch axle tubes. I am running a detroit locker with full floating kit and rear disc brakes, pretty hot 401. No problems with the rear axle or flex.Quote:
Originally Posted by 76-cj7
Hmmm....thats a good idea you got....i always thought of doing something along them lines but never went all the way with it
KY http://smiley.onegreatguy.net/ky.gif :shock: :idea:Quote:
Originally Posted by crabshaver
Hey is that the new grease? :mrgreen:Quote:
Originally Posted by Mudrat
Not new, been around for decades, but it IS water soluble #-o