-
1968 rebel engine swap
hello i have a 1968 rebel it is a 232 car what i wanted to know is will the mounts from bulltear work and also i am looking at a 304 it was in a 1984 cj will this motor go right in my car with out changing oil pan or anything well thanks for the help
-
Not sure on the mounts. Jeepsr4ever will have to answer that.
The 304 will bolt in, but you may have to re-drill the flexplate if it's an automatic. AMC V-8s are externally balanced, so you need to keep the 304 flexplate of flywheel. You may also have to have a custom pilot bushing made to adapt the crank to the trans. The I-6 is internally balanced, so you can't swap the flywheels.
Bob
tufcj