Quote:
Originally Posted by langer1
Thanks for the help guys but I still have low oil pressure after installing a new bulltear .007 gasket. The one I took out was .025 the .007 seemed to help a little. Engine is all rebuilt every thing was plasti-gauged and correct.
Pressure is 75# cold at idle and drops to 5# when warmed up. Runs and sounds great.
I should add that the pump gears are new also and the housing clearences are good too.
Actually no one has posted a pic of the midplate yet. The plate is stainless steel, about 1/8in thick. Ask mc for a pic, as i don't see it in the product section anymore. The pic above that was posted, is an oil filter relocation kit.
It helps to get the right info to start with.