ok lets post this one time sticky area for anyone needing driveshafts, that way we have a collection and i/others can dig for spares
Printable View
ok lets post this one time sticky area for anyone needing driveshafts, that way we have a collection and i/others can dig for spares
YJ front stock length or for a 2.5" lift, I-6, 5 Speed, D30 and NP231.
MC have you had time to look and see if you had one laying around yet? From what I am reading it will have a collapsed length of 40" and a running length of 41.5"
i sent you spec a while back for a cv unit lol
I don't recall getting that. :(Quote:
Originally Posted by fuzz401
What year, model, make cv shafts will work with a lifted CJ and YJ? Need both for ht CJ and the front for the YJ,
I've heard the Waggies will work, how about Cherokees? any other FSJ CV shafts???
Mudrat
FSJ's with quadratack have cv front driveshafts, you will need a larger cv style yoke for your dana 300 though
Yup, my buddy ran into that problem when he did his spring over on 4" leaves. Picked up some Tom Woods CV shafts and forgot to get the yolks for his dana 300. Boy was he upset that he had to wait on even MORE parts! 8) Anybody carry these on here, I am gonna eventually need 2 of them for the front and rear of my 300.
Jack
Important tip there on the T-case yokes - thanks. So the shafts out of any QT FSJ ... hummmm ... have to see if my guy has any available
Mud
Only the front is a CV shaft if I am not mistaken. My CJ7 with a Qtrack also had a CV front shaft, but for lifting a vehicle, you can't just cut it down and run it, you need a longer tube. That's why the FSJ one is worth more. I've seen a couple at UWI almost everytiem I've been over there, so let me know and I can keep an eye out for ya. :t:
Jack
I need some shafts for a T-18 and D 20 or D 300 combo, there wouldn't possibly be someone on here who has this combo and would know the dimensions? I know it's a long shot, being a Jeep forum and all, but I can try...
Thanks
i need front driveshaft for my 83 waggy.
Mine broke while climbing a hill at sugarcreek.
any info Holla
At least my kids like me, well most of them do!
I may have something, not sure if different T-case matters, assuming 360 engine on this.Quote:
Originally Posted by Crovus1969