well i messed with this thing again today, been to busy with work. Anyhow I still cannot get rid of this problem. If i unplug the IAC it revs just fine. just getting frustrated with this thing. ...
Type: Posts; User: Patf10
well i messed with this thing again today, been to busy with work. Anyhow I still cannot get rid of this problem. If i unplug the IAC it revs just fine. just getting frustrated with this thing. ...
I have a old IAC sitting around ill have to see if that one is any different, may pick up another one tomorrow as well. Im off work so ill have some good time to mess with it.
Even when i was...
well i tried adjusting the IAC again today and when the iac is disconnected and closed all the way i dont seem to get the problem with the slow return to idle. I reset my idle and took it for a test...
ill have to try the adjustment again tomorrow and make sure it closes the IAC all the way. It has that same slow return to idle like you mentioned. Im getting my coil input from the same connector...
i adjusted it per howells instructions. jump A and B on the diagnostic connector and turn on the key, this closes the IAC and then set the idle. If i did this wrong think that could be causing the...
So over the winter i installed a howell tbi kit on my 360. It runs alright but i have been having a few problems. Cold it runs pretty rough about the same as my carb did. Once it warms up it seems...
Ended up going with the howell kit, been taking my time installing it as i only have after work when its not raining. Did get it started and it idles smoother already!
