I put it in the freezer and it slid right in, I gave it a couple twists and it went right down to around an inch of seating. I made sure it was lined up where it should be, put the wrench on it and...
Type: Posts; User: aallison28
I put it in the freezer and it slid right in, I gave it a couple twists and it went right down to around an inch of seating. I made sure it was lined up where it should be, put the wrench on it and...
I have a Bulltear dipstick and tube that I am trying to install into the block. I can work it with my hands, twisting it and pushing it down and I can get it past the bend, about an inch or so then...
I have a Bulltear dipstick and tube that I am trying to install into a 401. I can work it with my hands, twisting it and pushing it down and I can get it past the bend, about an inch or so then it...
OK, so after all the work, here is where we are..........
I'm a little paranoid. 'Bout to drop close to 2k on motor stuff and I want to make sure it will be what I want.
Going in a CJ6, T-18...
Here are the results of the sonic test. You guys know AMC's. Based on the numbers, am I OK going to as much as .060 over? Thoughts on how far I can bore it? Going to .045 over will clean it up...
block is being sonic checked to see if it can go .060 over.................
These will work for a .040 over http://www.summitracing.com/parts/SLP-E-302K40/
Based on everyhting I've read, my plan is to have it sonic checked and bore it as little as possible. If it will...
No. My name is Arthur Allison and when I got my first MSN account I was 28 years old......
The mechanist said the the bore was .007 out of spec and he needed to bore it double that to clean it up. So from .030 to .044. He said all he could get was a .060 piston so that was what he was...
Bad news for me. The block is currently .030 and needs to be bored. It's .007 out of spec from what I understand. Dude said it could go .060 with no problem I'm not real sure. But I see Bulltear...
