If your gantry goes out of square after powering down, it probably has a twist in it. I've run into this before. To fix it, get the gantry square and with the motors locked loosen the 3 bolts on...
Type: Posts; User: djreiswig
If your gantry goes out of square after powering down, it probably has a twist in it. I've run into this before. To fix it, get the gantry square and with the motors locked loosen the 3 bolts on...
The guy at hypertherm said some people don't like the consumable life indicator because it will force you to replace it by ceasing to cut. Hence the ability to turn it off.
I got a survey about...
Okay. I called HT and Jason was very helpful. That symbol is for a feature that is not used on the 65 & 85. It is a consumable life indicator. He said it tracks the voltage on the 105 and will tell...
The one that shows the settings and error codes?
Already found it. I didn't notice anything in there that looked odd. Is there a certain setting that you want me to check?
I wonder why they...
I've unplugged everything and let if sit for a couple of minutes. When I power it back on with all of the extra cables unplugged, I still see the symbol on the screen. I'm wondering if it is...
I am having some cutting issues with my hypertherm 65 on a CNC table. I have the CPC port as well as the RS-485 port connected.
I see the keypad icon on the screen, but I also have a symbol to the...
I upgraded my x-box controller to a wireless version. It works good, and is nice not being tethered to the computer. The one issue I have is the wireless controller will power itself down after a...
Never had much luck with the wiggle pierce. The ramp pierce seems to work much better. Set pierce delay to almost nothing. Cut some 3/4 with a PowerMax 65. Shoots quite a rooster tail on the...
This is right after leveling, before I got it all dirty.
515
