So I went to fill my freshbuilt engine with distilled water for the first start and a river opened up from the timing cover. There is what looks to be a puncture in the cover from the drivers side...
Type: Posts; User: sethdowd
So I went to fill my freshbuilt engine with distilled water for the first start and a river opened up from the timing cover. There is what looks to be a puncture in the cover from the drivers side...
So what do you need me to do? Return the sanden one?
Ok, what size is the sanden belt?
What is the serpentine belt length supposed to be for the AMC V8 York serpentine kit?
I was shipped a belt with my kit and routed it according to the only pic online that I could find but the belt...
Should I be using spacers behind my York bracket? All of the other pulleys line up fine except for the York. It's like a 1/2" too far back. There aren't instructions so I was unsure. Thanks.
Just doing a pulley alignment mockup and thought you guys would like the pics:
http://i21.photobucket.com/albums/b294/sethdowd/jeep/photoP1.jpg...
Ok so I looked last night and I have the later keyway style PS with no outer nut. There's just a allen head in the middle so I am assuming this is the kind I can just tap off with a hammer. I don't...
Thanks so much, sorry for the typo, was frantic :). As far as the from/to for heater. Does the rear manifold heater port go to the BOTTOM heater passage on the firewall??? Totally forgot to mark...
Really?? Mine's a 78 as well. CJ5. The two heater hoses (if you're looking at the firewall from the front) are basically to the right of the battery tray.. With the old one they fit just outside...
Just purchased one. I'm excited to get this engine install wrapped up. Which belt should I purchase for this? Also, what pulley removers do I need for the saginaw (circa 7eight) and alternator? ...
Has anyone installed this in a V8 CJ? How do you fit it around the coolant passage hoses from the firewall?
I have a saginaw factory pwr steering pump from a 78 CJ. Which pulley remover tool do I need to get it off? IS there one that works for this pump as well as the typical alternator for this year...
First of all, please excuse the ignorance...
So I bought this engine already built and it didn't come with the Edelbrock manual for the instake but I found a manual for the 2131 which I'm assuming...
Ok, thanks.
Would this include replacement for ALL alternator and ac brackets (other than the AC supoort base). Also, does it come with the 7/16 bolt for alt as well as the waterpump support bolt? Sorry for so...
Well I figured out the bolt size issue, but still need help with the bracket and waterpump bolt. Anyone???
I have a cj5 which HAD a waggy (91 or so) 360 in it. I am in the process now of getting ready an early 70's 360 and have run into a couple of issues. Right now my main concern is the alternator...
hello (crikets)
What is suggested for exhaust bolts on an early 70's 72-73 360. The ones I had before were pretty hard to get on and rusted pretty bad, not to mention came loose. Also, what is the correct size...