any more pictures of anyone routing with the new star labs tables?
Type: Posts; User: stillworkin
any more pictures of anyone routing with the new star labs tables?
Do you have the tool set up with the correct kerf width? If there is no kerf width then sheetcam will run the torch down the middle of the line.
The First owner was Jamey Jordan @ Handmade Seat Co.
Thanks,
Martin Fountain
not sure if you had a chance to send the license keys to me or not. I don't recall receiving an email from you, although I don't know what email you'd be using to search for it. if you could send...
429
what is the pricing for this upgrade now? I attached a picture of the gantry I have. 428
Thanks, PM sent!
I tired to send you a PM but it says your inbox is full. My email is martin_fountain@yahoo.com thanks for all the help!
what specs should I look for if I need a new computer? I don't use Bobcad for drawings, I use autocad and autodesk inventor. I would only need mach 3 and sheetcam. Do you have to send me the discs...
So what are my options if they can't pull it off the hard drive?
So if they can't pull the programs from the hard drive, I'm basically screwed?
I have a gateway computer (not sure of specs) that came with the kit I purchased the software was already loaded on it. 2 nights ago I turned the computer off and went to start it up last night and...
email sent.
I have the older version gantry and table with the v-rails and currently have a 4x4. I was wondering if you could send me a link to purchase the longer v-rails and gear rail.
Thanks,
Martin...
My description of the way i performed the switch offset sound like i did it correctly? I apologize if i am missing something that was described in setup cd's or manuals but when i purchased my...
"3. Now lets go to config and motor tuning. Bulltear tables use a very smooth gear on all axis but not the same size gear or pitch on all axis. For X,Y,A axis the following is used.
1019.1 Steps...
When i first flip the switch on the red led @ the off button comes on and then the Z and X led lights flash red once. After that i have nothing.
My breaker is on the bottom but yes I tried pushing it but it wasntt triped
Machine was working great until friday, after i loaded my material onto the table the power from the box to the motors shut off. The red led next to the OFF button still stayed lit, and i am able to...