Search:

Did you mail out a flier or anything for this upgrade? Don't frequent this forum much but it would of been nice to know you were offering upgrades.

Thanks,

Troy

How much for a new 4x8 gantry kit. No shipping, I will pick up. Also what is the lead time.

Yeah I found and have started playing with THC delay. Seen some results, but the verdict is still out. I have more playing to do yet.

Ideally I would love to get here> ...

Yeah, so ended up watching it a lot closer. My long delay is between torch on and the torch actually firing.

Now off to find out how to lock the dthc when cutting small holes....any info on this

Just curious what everyone is running for a pierce delay?

I have a Cutmaster 81 and my pierce delay seems quite long compared to others systems I have watched cut on Youtube.

The thinnest I...

Hmm...that explains it!

Never as much as I would like too! Wish I could log more time on it.

I have been cutting typical offroad parts, wheel centers, rocks rings, signs, and misc tabs and brkts.

Chris has been...

Any more info on this Charlene? I recently cut some 12 guage and noticed the same problem. I have yet to look in to and test all the variables, but would like to know if you found anything.
...

Mine in action buzzing out a rockwell wheel center>
http://www.youtube.com/watch?v=Xd5zYwaFsQ4&feature=plcp

Ok. So say I have a correct drawn part in Autocad, and I want to place an image on it in a certain location. If the image is in Corel draw, how do I get them to work together properly? Do I import...

I know I would have to change the switch wiring...but I will prolly leave it.


On a side note. What is the best program to use for importing artwork like pictures and text. For example, say I...

Agreed, I should of mentioned that the problem pointed to a bad switch and not the Active Low/High settings. Chris just changed both, because that is the kind of guy he is.....no patience to try one...

So, just an update for anyone in the future.

Our machine wasn't performing the G28.1 (auto-touch off feature) portion of the code correctly. It would randomly zero through when at any location...

Its very possible I am. I went over the sequence over the phone with Chris an he said it sounded correct. I cut some parts fine others failed to. I meant zero not REF. If I hold the torch about...

Our stuff is not working again. Same problems. Same issues. Licesnse installed. Pretty sure its still a SheetCam thing.

I load in Gcode, reference to tell X0 Y0 and Z0. Hit run. System finds its...

Any adjustments to the pierce heights, cut heights, and Z were funky due to the issue we were having. We ended the day with very different values than we started with due to the troubleshooting...

Matt... I am curious as to how the Sheetcam license was affecting the Gcode and Mach?

Owned by a license issue....damn! I never read anywhere about the Sheetcam license.

I switched the to the MP1000-THC RefZ last night at about 8:30 as a last ditch effort, and never changed it...

Matt.....I will be gone all week, but Chris will be calling you this morning.

Yes the switch is Active low. When torch touches the table and lifts, the switch is opened, the Zhome light comes on in Mach. The light is also on in the control box.

I hooked a multi-meter up...

N0000 (Filename: SBCMMPlate.tap)
N0010 (Post processor: MP1000-THC.scpost)
N0020 (Date: 5/6/2012)
N0030 G20 (Units: Inches)
N0040 G53 G90 G40
N0050 F1
N0060 (Part: SBCMMPlate)
N0070 (Process:...

This isn't a every once and awhile occurrence, this happens every single time I try to cut.

I have brand new 4x8 sheet of .25", and have tried to cut in several areas of the sheet. I get the...

Sorry, I looked at the X axis,

Z is at 50 and 10

If I run it with THC off, so its not looking for volts or anything. It will keeps adding up the Z movements. Out of 4 pierces, the first starting at .16", then the second at .about .19, the third...

I have looked at the Z, dis-assembled, reassembled it, I don't feel that it is sticky

I have tested the switch and ran the Z up and down a thousand times while watching the Z home light. I only...