Looking for "old" style jerry cans in good condition. Thanks.
Type: Posts; User: juggernaught
Looking for "old" style jerry cans in good condition. Thanks.
Looking for a parts diagram that will show all parts and gaskets for a '70 amc V-8. I especially need to know the correct gasket/material to be installed on the pressure bypass (copper/paper). Also,...
Thanks that was my thought, just needed to talk to someone who had done it before.
Just used a mild steel 7018 welding rod. The rub seems to be that I used an air nozzle to cool the knuckle ear down quickly (mostly so that the heat would not transfer to far). Evidently, by doing so...
Went ahead and welded the hole so I could reream...........as soon as I tried to ream the welded hole I could tell that the material had become "hardened". In fact it was so hard it could not be...
Just "over reamed" the knuckle on my '78 cj7 while trying to install a high steer tie-rod. Can anyone tell me if the knuckle/arm is a mild steel material or a cast material so I can weld it properly...
This shop was recommended to me by a speed parts house in the same area. They are more of a classic car performance center.............just got lucky.
Wish I had the time to research all of the options, but this seemed the simpliest and quickest fix for the buck. Just out of couriosity........what is the dia. of your new tie-rods now? Also, part of...
Just ordered my H/D tie-rod drag-link and pitman arm with all ends and a reamer from Partsmike for about $378. The new setup will be 1 3/8"dia. (instead of 7/8") and will be mounted over the steering...
Sorry 88 & MR not very good at posting pics..............Even now if I posted pics you would see very little damage since most of the dents were pounded out and repainted. SORRY!
Do I wish I...
My wife has always had alot of family in AZ. I am originally from Ca. and miss the weather. Mostly fished while in WA. Too busy in WA (western)any more. I like all of the public land access in AZ...
I am about an hour and a half(90 miles) East from downtown Phoenix, out Hghy. 60 towards New Mexico. I live in a town called Globe next to Miami at about 4,500 ft. elev. Started ranning last night...
l will keep looking and hope I can find some more info.
ORC....Talked to Mike @ Partsmike..........Always nice to talk to someone who knows there stuff (especially cj's). He told me exactly what I needed to know and has all of the parts for a reasonable...
I have talked with them before.....very knowledgeable about the CJ's. Will talk to them and see what the have to say. Thanks for reminding me.
Unfortunately it is bent so an GOOD measurement is not going to happen, but I can get an approximation. Thanks I'll give it a try when I get some new H/D parts.
Can anyone enlighten me about replacing the tie-rod and drag-link on my '78 cj7? There does not seem to be enough clearance between the tie-rod ends and the leaf springs to drop the tie-rod out. Are...
Looking to change the springs on my '78 cj7. I believe I have about 2.5" of extra spring arch. I would like to know what/how to measure my springs in order to figure out what I need to replace them...
That's what thought..........Mr.Gasket kit only comes with two springs, of which only one fit my application. Ended up taking the dist. and getting it totally recurved at a speed shop. Found out that...
Is anyone familiar with a manufacturer or source for an advance curve kit (including springs & weights) for a stock 1978 motorcraft vacuum adv. dist? I can only find a Mr Gasket 925D kit that is a...
Update.............Finally pulled the jeep out of the garage after rolling it a month ago. So after a complete rollover here is the list of damage:
One smashed fender
One dented fender
One...
Looks like my tie-rod is slightly bent. Possibly after I rolled my jeep last month. It looks like it is about 1/2-3/4" out-of-round. While probably not yhat big of a deal, I was thinking about...
trying to keep the retro-78-stock jeep thing intacked...............don't really want to do the rock-climber thing.
Just got some fenders in and to my surprise they have seams across the outside of the fender and down the fenderwell. Looks like there will be some extra welding and grinding to strengthen and blend...
As my sign. says I run a truck avenger 670....secondaries are not opening early...........this is not a engine load problem...........enrichment is working properly.......I do not have...