Hey, I have your serpentine system w/new style sanden a/c and had too over tighten belt to keep a/c pulley from screamin, and I burned up a pulley bearing. a/c was recently serviced and works great...
Type: Posts; User: fastr@pahrump
Hey, I have your serpentine system w/new style sanden a/c and had too over tighten belt to keep a/c pulley from screamin, and I burned up a pulley bearing. a/c was recently serviced and works great...
Thanks Bob, that's a good idea, and i'm going to give it a shot. I was thinking the same thing on the intake/head angles but thought how could a machine shop overlook that!.............after all the...
I'm using composite gaskets, intake manifold was port matched to Indy cylinder heads using these gaskets. I'm running an internal oil line, would you run a valley pan and notch out for oil line, or...
I have a k&n filter on the oil fill tube, and a k&n filter with a 3"extention tube at the pcv grommet in the intake manifold, no pcv valve. Manifold is an edelbrock RPM and even with the baffles...
OK, so I have a problem with burning oil in my 401 engine. The motor was rebuilt in 2004 and was modified with .060 over JE 10.25-1 pistons, moldex stroker crank(427 C.I), crower roller cam, bulltear...
Ok, I pulled the oil pan and cleaned out debris( quite abit stuck in the edges of sump ), checked main bearings and all looks good( glad I cleaned out sump, don't need any more trash going thru new...
All of the above, just bore it out .060 over(check cylinder wall thickness,some blocks can be bored out more) for more displacement. Aluminumn Heads will let you run more compression 10.00-10.25...
Yea, I think I will drop the pan and check main bearings just in case. Question- I had 4-bolt main caps/studs installed by machine shop 8 years ago, and I'm not sure what they torqued them at when...
Can I get a 4-bolt crank pulley, instead of 3-bolt pulley, in that kit?
My 73 jav/amx is a factory a/c car, with a sanden #U4663 134a conversion(classic auto air man.co. Kit), GM stye alternator, 4-bolt crank pulley. What do I need to order for your serpentine system to...
hey, new to your site, wish i would have heard about you guys earlier. MSD dizzy gear is gone, and i don't have a filter by-pass(thank GOD?). My question is what are the chances of debris in...
