Search:

Thanks tufcj. The more I thought about the 3-way fuel filter and the way that I need to add air pressure to the tank, I'm thinking that I should "pinch" off the vapor line during the start-up phase....

The Situation: I installed a 1984 AMC 360 into my 1980 CJ7. I have also installed a DUI distributor with new plugs and plug wires. The engine would not continue to run but will kick-over with...

Thanks Bob,

This is what I was hoping. I did apply RTV to the bolt and used two thick washers to back it out a bit. This seemed to stop the leak. At this point, I am going to move forward with the...

Hopefully you can see the included pic. As I was running the bolt through the water pump and through the timing chain cover the bolt broke through the casting wall. Coolant leaked through the hole...

Correction ...as you look from the front of the engine the brake through is on the driver's side or right side toward the #1 cylinder.

Gentlemen and all you engine experts...that's not to say that Gentlemen and experts couldn't be one in the same. I have been working at installing an '84 AMC 360 into my short wheel base Jeep CJ7. As...