It has the internal Crosshaft ! It came with a T19/Dana 20 Combo, Bolts are accessed from inside Bellhousing ! I cleaned the dust plate/shield that goes between Bell and Engine and I see Witness...
Type: Posts; User: djaponi3
It has the internal Crosshaft ! It came with a T19/Dana 20 Combo, Bolts are accessed from inside Bellhousing ! I cleaned the dust plate/shield that goes between Bell and Engine and I see Witness...
I Guess I Shouldn't be Complaining as it does fit my Amc 360 Block and the starter engages with the flywheel ok ! Its just those 2 missing bolt holes that throws me a curve ball it just seems that 4...
I have a cast iron Bellhousing with the numbers 421 664 ! The Bellhousing to block pattern is correct for my Amc 360 with the exception of 2 missing bolt holes at the ten and two o'clock position...
March makes a Single pulley kit for the long water pump ,Part # 5600 The Guy on the Phone said this kit was just released a month ago cost 240.00
Looking for a Single Groove Pulley Set for my 360, Does Such an Animal even Exist ? My Jeep Doesn't have Power steering or A.C
Lucked out and found a local boneyard with a 344 in stock 50 bucks delivered off to the Machine shop with my heads to share my Newfound Knowledge on where to check these heads for cracks ! Thanks...
Thanks mrtazwrench !!! I Bolted Both Heads together W/head gaskets and Blocked off the Coolant Passages on intake Ports to Pressure test Both Heads Found that this Crack Spreads dead Center Corner of...
They are 502 heads ! I See Bulltear offers 2 different heads used and checked ! are they compatible part numbers ? Looking to buy 1 Head and Have it Machined and all the Goodies Transfered ! Not...
Just Got my 360 Fired for the First time only to find coolant leaking externally near front outer headbolt area appears to be a hairline crack just above headbolt ! Torqued em down in steps and in...
Definetly a T19 it has dual pto ports and top cover has T19 cast into it , mounting studs go through inside of bellhousing and no ears ! So Guess it Started life in an International ! Thanks For the...
Going through a T19 Close Ratio speed Can Anyone Provide info what it Came From ? Casting Number Side of Case 13-09-065-905 , And What I Believe is a...
I Appreciate your input and Ya Dont Appear Grumpy
Yeah Randy told me about some people and how they Neglect mock up assembly for clearance check I.E. Lack of clearance ! It supposedly has a Smaller head I Think 3/8 ! A Light bulb lit up above my...
rechecked my timing cover with a magnet and it does have the sleeve its also stamped J above the timing scale ! Got Some Bulltear gears coming ! Also ordered a Bolt from Performance American Style...
I really appreciate the help btw !
I have the front all apart and closely inspecting all items ! I have spun this motor by hand about 20 revolutions And already I see undesireable wear patterns on the edge of the cam gear there is...
Rollpins are in place !
The Cover is from Crown no Sleeve and an Hei Distributor ! Tried Original Distributor in new Cover and it fits a lil better not much ! Might Attribute that to a very worn Dist Gear ! Tried Original...
Finally Putting My AMC 360 Together Today Armed With All the Forwarnings on Oiling issues and Dizzy Gear Relationship ! Heres How it Goes ! Inspected all Oiling Passages in Regards to Dist gear...
Thankyou Very Much ! Got em today !
Just Wondering If We Should Be Treating These Distributor Gears Like Ring and Pinion Set Up And Use Marking Compound For Gear Patterns ! After Eliminating All Oiling Passage Issues ?
Thanks ! I Will Call Friday ! Happy Turkey Day!
Anybody Know Where I Can Locate Camshaft Keyways For My Cj5 360 ? Chucked the Old Cam With Keyways Like A Dummy ! Thanks !
Any input on this contemplated marriage is appreciated I am seriously thinking of taking my 1968 rambler american 2dr body and mounting it on my 1976 cj5 frame sort of replicating james garner...