headers

[bigun]

I am in the process of putting J20 cab on Cherokee frame and have been looking at headers. One set I have seen are for little jeeps and are fenderwell exit. I was wondering if anybody had used these on a FSJ?

[jeepsr4ever]

I have heard from a source that they do work.....but personally i dont know

[bigun]

Just to update since I know everybody is sitting on pins and needles. I spoke to local guru Tracy at SW4X4 in Alb. and according to him they should work better in a fullsize than they do in the CJs. So on his say so I have purchased a set on E-bay for the sum of $115. which includes shipping. I'll let you all know how in turns out.

[Mudrat]

Sounds like quite the project... J-truck on a Cherokee frame, with a ?? motor, and CJ headers ...

Do keep us informed and make sure you snap and post the occasional pic.

Mudrat

[bigun]

Sorry I hadn't seen your post Mudrat. Motor for now is a 360, but I have 401 on a pallet waiting to be rebuilt. You have probably seen else where this rig is also going to be running on propane. The tranny is a T18 and I just picked up a twin stick dana 20 out of a scout. Right now project is on hold I am an electrical contractor (one man company ) and both of my trucks decided to go down at the same time so the past two weeks I have been dealing with that Ie spending jeep money

[Mudrat]

Sorry I hadn't seen your post Mudrat. Motor for now is a 360, but I have 401 on a pallet waiting to be rebuilt. You have probably seen else where this rig is also going to be running on propane. The tranny is a T18 and I just picked up a twin stick dana 20 out of a scout. Right now project is on hold I am an electrical contractor (one man company ) and both of my trucks decided to go down at the same time so the past two weeks I have been dealing with that Ie spending jeep money

Understand, first things first - that would be eating When you get doen there come fix my house. I'm sitting here in the dark sweating my butt off cause the freak'n breaker keeps tripping!!! Ya suppose a 30 year old Cuttler Hammer needs to be replaced Or all of them !!

Pat

[bigun]

Old style Cuttler hammer is easy I can find them locally Try finding a Zinsco. What hurts is the price of materials is going throught the roof. My supply house informed me that 1/2 EMT is now $42.00 a hundred feet in january it was $12.00. Jeep may be on hold for a while Bart's family makes a large portiom of their yearly income working for the conservance desrict in the summer so we realy can not tie up thier shop for any length of time because equipment that makes money has the prority

[Mudrat]

Yeah, CH is pretty popular and I only have 20 more to replace I think the big problem is the alumium wiring in the house - built in '72 when code allowed it. So the CU/AL breakers are between $10 (15Amp) and $22 (60Amp) each at Lowes. Where are the good old days of a 25 cent fuze I also need to get some more of the anti-ox paste since it's time to check all the outlets again as well.

I need to move into a new, bigger house!!!

Mudrat

[jerry]

My wire has not gone up much but my steel casing went from $4 ft to $12 in one month it hurts. I bought 500' I wish I had bought 1000.


Jerry

[Mudrat]

My wire has not gone up much but my steel casing went from $4 ft to $12 in one month it hurts. I bought 500' I wish I had bought 1000.

Jerry

I was at the trailer place on Monday and they were saying the price of steel has tripled since Jan. I think Fuzz can jump in on that too.

BUT the question now is ... did your headers get there and have you at least looked at them??

Mudrat