Mine was good except for a concussion I recieved saturday afternoon form a boating accident. Still havent gotten a tan.. I know jeep bud is chuckling right now.
Anyone have anythign exiting happen?
Mine was good except for a concussion I recieved saturday afternoon form a boating accident. Still havent gotten a tan.. I know jeep bud is chuckling right now.
Anyone have anythign exiting happen?
[COLOR=#000000]
Featuring www.StarLabCNC.com[/URL] for CNC plasma machines
1-651-433-3689 TOLL FREE 1-855-433-3689
spending the weekend with gail today we are going to pioneertown
movie set to gunfight and spend time with the grandson.
later, rollen
83 eagle (r.i.p.)
85 gl1200 gold wing LTD pilot
1999 gl1500C valkyrie(plain gold wing)
1994 jeep grand cherokee limited pilot
McDonnell Douglas c-17 mechanic
corrupting people since 1962
rollen how many tv shows/ movies ya been in?
[COLOR=#000000]
Featuring www.StarLabCNC.com[/URL] for CNC plasma machines
1-651-433-3689 TOLL FREE 1-855-433-3689
I hope whatever you hit with your head is okay . I have done nothing this weekend . Okay I did work on the Bronco a little but that will be neverending. If you want a tan come out to Vegas, you can get a tan in your house in the summer .Originally Posted by jeepsr4ever
Got my 390 back from the machine shop Saturday afternoon. Re-cleaning the block today, coating the lifter valley with Glyptal, checking all clearances, and hopefully getting the crank set in. I re-check everything done by the machine shop. It's easier to check/correct now than have to take it back apart later, or worse, have the engine come apart.
1969 AMX
1967 Rambler Rogue
If you need a tool and don't buy it...
you'll eventually pay for it...
and not have it.
Henry Ford
SAT - Got most of the YJ dash back in - have some turn signal issues in the rear harness. When the left is blinking the right running light dims and vs vs when the right blinks the left dims??
Sun, worked a chainsaw for about 5 hours cleaning up the last tree from the hurricane. Just when I was calling it quits (about 2:30) the neighbors boy comes over with a problem with his Neon. Can't get the front hub off to install new studs (he said the "service shop" cross threaded 3 of 5 and one snaped off at the hub face, the other two are unservicable!!)
Long story short - MC to the rescue (except his cell never seems to be charged??)
Well at 6 we dropped by AZ and rented a major-kinetic-energy-slam-hammer-wheel-puller. 4 whacks and the sum-beotch came off - with only 1/2 the sealed bearing that kept everything stuck in place (the inner race was seized on the hub shaft).
Now. How in the heck are we going to get the other 1/2 of the sealed bearing out??
Mudrat
" “It is said that men go mad in herds, and only come to their senses slowly, and one by one.." -Charles MacKay
"'The trouble with our liberal friends is not that they're ignorant; it's just that they know so much that isn't so.' "
-Ronald Reagan
VOTE
mowed the yard about 3 acres it take a while we are mowing 2 time a week I guess it's all the water a fertilizer. We have the big pig roast coming up July 24 this will be the 12 yr. anybody be in Eugene come on down.
Jerry
ccouple of front pages in the desert dispatch newspaper. billboards and
tour brosures in asian countries. the gun monster(arms specialist) for
a french documentary. the girl was cute!
later,rollen
83 eagle (r.i.p.)
85 gl1200 gold wing LTD pilot
1999 gl1500C valkyrie(plain gold wing)
1994 jeep grand cherokee limited pilot
McDonnell Douglas c-17 mechanic
corrupting people since 1962
Their should be another lip on the backside of the bearing just before the retainer. Tell your neighbor you want him to brign the spindle in for servicing, without the right tools you wont be able to pull the bearing
Sounds like you guys had a busy weekend....yeah cheapjeep it was south lindstrom Lake....People on the beach thought I was dead
[COLOR=#000000]
Featuring www.StarLabCNC.com[/URL] for CNC plasma machines
1-651-433-3689 TOLL FREE 1-855-433-3689
?? Do you have a drawing of the spindle and how the bearing goes in? When it all came apart, the hub with the inner race seized to it, what stayed in the spindle was the outer race and balls for the bearing. There is no way I could see to get anything behind the outer race. Unless we pull the spindle off - and that looks like a MAJOR pain!! Struts, ball joints, upper and lower arms etc... there has to be an easier way. Oxy and Acetylene??Originally Posted by jeepsr4ever
Thanks - I'm begining to hate American made Jap-Crap!!
Mud
" “It is said that men go mad in herds, and only come to their senses slowly, and one by one.." -Charles MacKay
"'The trouble with our liberal friends is not that they're ignorant; it's just that they know so much that isn't so.' "
-Ronald Reagan
VOTE