Jeep Heads! Post your Jeeps!

[Lifted79CJ7]

What hoses did you use to connect the TJ gas filler to your gas tank? I like that mod.....

Jack

[rollen dean montoya]

haven't got any pix yet but can give you a brief on the eagle.
its a 1983 amc(jeep according to the C.H.P.) eagle 4x4. its white with
blue lower body molding, 258 I-6 , amc 30 front diff, amc 35 rear diff,
np-129 t-case(for the moment) liberator all terrain tires 215/75-15,
the factory roof rack and original interior. the color does vary from mudhole to mudhole depending on where the hell i happen to be.
pix coming soon later, rollen

[tufcj]

I thought the TJ filler was a neat mod since I was using TJ flares. I found that the CJ neck (79 up, small hoses) fit the TJ housing using only 4 of the 6 screws. I went to the local hydraulic supply and bought 2 straight pieces of fuel rated hose, I couldn't get the factory hoses to work without kinking at the molded bends. I think they're 1" and 1.25" ID. I got the filler housing off ebay for about $10, and I think the hoses cost me about $15.

Bob.
tufcj

[mulescj8]

Here is one of the 3 Scramblers i own........I have enough parts to build a 4th......lol

[tacoman]

how do i add a picture here fellas

[cheapjeep]

how do i add a picture here fellas

Go here and read, its pretty easy.

http://www.bulltear.com/forum/viewtopic.php?t=2581

[eight]

Here's mine.

[Goose]

well here is my 77 CJ5 w 304 1 1/2" shackles and pretty much stock everything else. Oh and my son Jake (he's really 6'4 so the jeep is really lifted har har)

[Goose]

And this is the "other" Jeep with a shot of the "Bulltear equipped" 360 I just finished up. (and the primer paint job I described in another post "Do it your self jeep painting""




It has 4" lift 4:10 gear and a locker in the rear the 360 is .060 over ported heads mild cam with a torker intake and edel 1406 carb with a mallory hyfire ignition system

[Mudrat]

Goose - I'm impressed ... VERY nice rides!!! Ah ... O-yeah the kids cute too Has he driven the CJ yet?

Mudrat