Ok I posted for a cost before but now I want some opinions.
History: Did the gears & spring thing a couple years ago and oil pressure was minimum 25psi hot. Long story short I jumped in Moose and went for a spin seeing almost zero oil pressure at the lights and about 10 running..........was at 25 just a few hours before.
So gears & spring wont help I would gather, thinkin its cover time. I remember when I installed the gears the adaptor was already scored.
Now do I go Bling Bling on the nickle stuff, or spend the extra cash on the regular cover but include a midplate?
May as well be honest cashflow is short since opening my own company, so I want the best opinion. Is the nickle just Bling or will I see a drastic increase in lifetime?
Also MC if you could maybe do a bulk order price for me that would be a huge help.....cover, adaptor, gears, spring, midplate (nickle and normal)
To end, yes I will be trying a mechanical gauge just to see if sending unit is shot on the elec gauge. But even at 25, I think its getting a little low.....I remember MC saying hes at 42 hot on his motor.
Reply With Quote
..So My money went into rods,mains and gaskets..Now Im beggin and borrowing for a new Timing cover (Or hoping MC has an overstock sale soon). But do check the bottom end out.. The best oil pump in the world won't hold pressure if the bearings are toast and if the small particles of metal are circulating a new cover wont last long either.. Check it out..
=D> 
