But, I don't see that Bultear sells them?
But, I don't see that Bultear sells them?
You can get Offenhauser valve covers new from Summit Racing for about $200. P/N 5773
Rumor has it that Edelbrock will re-release their classic finned cover in the fall. It's listed in their 2005 catalog.
You can get a couple of different styles from Omix-Ada.
http://www.omix-ada.com/Catalog/p116new.htm
You can get the same ones from Quadratec.
I heard MC here had cast a couple of prototypes. When will they go into production MC?
There was also a guy over at www.amcforums.com who had the welded sheet aluminum style for sale.
Bob
tufcj
1969 AMX
1967 Rambler Rogue
If you need a tool and don't buy it...
you'll eventually pay for it...
and not have it.
Henry Ford
We have several coming form edelbrock but they are on backorder at the moment. The omix ada's are decent and we are thinking about doing a buyin with them. As far as Bulltear aluminum covers.....well our casting guy pulled his last hair out and bailed on the job so we are seeking new casting houses for the project
[COLOR=#000000]
Featuring www.StarLabCNC.com[/URL] for CNC plasma machines
1-651-433-3689 TOLL FREE 1-855-433-3689
Do you guys know if the Edelbrocks will clear roller rockers?
I have a set of the old Edelbrocks on my CJ and on my AMX, both are over rocker rollers, with no clearance problems. If the new ones are cast the same, they should clear. They AREN'T tall enough for rocker girdles though.
MC - What's the price going to be on the new Edelbrocks?
Bob
tufcj
1969 AMX
1967 Rambler Rogue
If you need a tool and don't buy it...
you'll eventually pay for it...
and not have it.
Henry Ford
I think between 80 and 90....not sure yet
[COLOR=#000000]
Featuring www.StarLabCNC.com[/URL] for CNC plasma machines
1-651-433-3689 TOLL FREE 1-855-433-3689
Check out the Herman Lewis valve covers at Payton Performance . MC might have a tie with them also.
http://www.paytonsperformance.com/prod01.htm
IF washington wont quit spending money like mad men then i suggest we claim 9 deductions in 2010 and withold or taxes till the final dead line of 4/15/2011.
CJ7 AMC401 http://www.fordification.com/images/forum/bug.gif
"May God have mercy on my enemies, because I WON'T!!" -General George Patton
Member #377
Here they are in a CJOriginally Posted by Dusty
http://community.webshots.com/photo/...64004854wPmXKD
IF washington wont quit spending money like mad men then i suggest we claim 9 deductions in 2010 and withold or taxes till the final dead line of 4/15/2011.
CJ7 AMC401 http://www.fordification.com/images/forum/bug.gif
"May God have mercy on my enemies, because I WON'T!!" -General George Patton
Member #377
After seeing this................
http://www.edelbrock.com/automotive_..._classic.shtml
I called Edelbrock to find out more info. The guy I talked to said they aer right now in tooling, and shold be released in a month or so. And that although the ones for the AMC does not state the hieght, they will be higher than what they used to be (probabl e able to clear rollr rockers). He said retail will be about $240 (IIRC).
So I looked at Summit, I couldn't believe what I saw, so I ordered it.
http://store.summitracing.com/defaul....asp&x=55&y=18
I know they are not availble yet, but they have them listed, and a ship date of 8-15. For that price I will wait. Hope I didn't stir the pot :D