My jeep

[bulletproofcj7]

I built my CJ-7
http://image16.webshots.com/16/1/38/...5DbNPdV_ph.jpg

Its a 2001 shell valley kevlar body, titanium metalic gel coat.Stainless hinges. bestop interior. seats and supertop/ bikini top and toneau cover and For now it has about 3" skyjacker lift and shackles and 33" MTR's. The 304 was hot tanked, bored .030 over and i built it with edelbrock parts. Cam, Intake, Carb, Springs, Chain, air cleaner, and have shorty headers waiting to go on in place of the hedman fenderwell headers. It has M.o.r.e. bombproof motor mounts, D.U.I. dist and wires. Borgson lower steering column. optima red top battery, mean green starter.
I fab as much as i can, so far i've built a rear bumper with 2" reciever, tow points and swing out spare tire carrier with built in wheel bearings, spindle and hub for the front ( it spins driving down the road). and a highlift jack. I just built a 3/8" thick steel steering box mount that i copied from pictures, and $40. adjustable sway bar disconnects that i made from small 3 point tractor hitch bars with heim joints. A 1/4" thick steel skid pan that is 1" higher than stock to hold the NV-4500/D-300.
I think thats about all for now. There is a LOT more on my list of things to build and buy!

Here is a link to my photo albums.
http://community.webshots.com/myphotos?action=viewAllPhotos&albumID=193298203[/url]

[pyagid]

neither link is working

this is a link to all the images that came up under the same username though

http://www.webshots.com/search?new=1...bulletproofcj7

and it looks like there are a few pictures from the Jeep Rally Are you going this year in Somers, CT? I should be there with my fathers CJ

-Paul

[bulletproofcj7]

Thanks for posting that link. They are from last years jeep rally, i plan on going this year if i dont have to work.