Warning: preg_replace(): The /e modifier is deprecated, use preg_replace_callback instead in ..../includes/class_bbcode.php on line 2962
wtb tf999 auto tranny
Results 1 to 3 of 3

Thread: wtb tf999 auto tranny

  1. #1

    Join Date
    Mar 2004
    Location
    salisbury md
    Posts
    49

    wtb tf999 auto tranny

    needed for cj7, want to go from manual to auto. also need everything to go from manual to auto on a 304. ( flywheel,driveshafts, etc.)

    have a fresh t-18, will bolt up to a 304, includes bellhousing(304) ,advance adaptor for t-18-dana 300, clutch. this tranny has 3 runs on it before jeep parted out . 600.00

    may consider trade for a very good tf999, bellhousing, driveshaft combo for a cj7
    79CJ7 304
    78cj5 360

  2. #2
    You can get the trans from a full size 6 cyl Jeep. (many came with it after '80) Some were 999 and some were 727. 8 and 6 used the same bolt pattern on the trans and crank, so the flexplate will bolt up, BUT the balance is different. 360/304 are different too. 6 is zero balanced (internal).

  3. #3
    Thank you from BT ULTIMUS MAXIMUS STATUS
    Join Date
    Nov 2003
    Location
    Atlanta, GA
    Posts
    2,386
    A 727 will bolt up between a 304 and 300 as well, although you will need to run at least 4" of lift...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Bulltear Ad