I'm looking to have a 36-1 trigger wheel made that will fit in between the crank pulley and the balancer on an AMC 360 (88 SJ). Then I need to find a way to get a VR sensor to 1 mm distance from the teeth. I can get a diagram to you for the basic dimensions of the wheel. It needs to be steel (magnetic propperties0 and need to think about mounting possibilities for the VR sensor. The other concern is not displacing the crank pulley too far from the balancer and creating an angle in the pulley belts.

This would be for retrofitting EDIS, which could be very nice (programable wasted spark

-Nick