Originally Posted by
dbesade
Okay,
There is no leaks in the Master Cylinder, I checked when I was bench bleeding it. Have checked again, no leaks past the seals. I did replace the rear brake lines, I bled them before I attached them to the drums so there wouldn't be any debris.
When I nail the brakes they do nothing, a slight stopping sensation but nothing more. I have to pump frantically for them to work correctly. How would I check the proportioning valve?
My CJ Has Stock power drum brakes. I have a booster on the way already, the one on my CJ is stock, as is/was ALL the brake parts.
-Dave