what timing chain do you guys recommend and what should I look at on the gears for oil passages
what timing chain do you guys recommend and what should I look at on the gears for oil passages
Cheapest double roller setup would be from Summitracing.com and its the half radius oiling passage 180 degrees from the keyway that should be clear of casting flash or any flaws.
[COLOR=#000000]
Featuring www.StarLabCNC.com[/URL] for CNC plasma machines
1-651-433-3689 TOLL FREE 1-855-433-3689
Get one of these and let us all know if they are any good!
http://cgi.ebay.com/ebaymotors/AMC-J...QQcmdZViewItem
1969 Rebel 401 TH400
1978 J10 401, QT
1978 Wag 401 QT
1973 Javelin AMX in pieces.
Those are nice
[COLOR=#000000]
Featuring www.StarLabCNC.com[/URL] for CNC plasma machines
1-651-433-3689 TOLL FREE 1-855-433-3689
Got a Rollmaster in my 390. No problems so far.
Bob
tufcj
1969 AMX
1967 Rambler Rogue
If you need a tool and don't buy it...
you'll eventually pay for it...
and not have it.
Henry Ford
stupid question, but which rollmaster set is better cs7110 or cs7111 with both sprockets nitirded