In my search for parts and what not for my AMX to get redone I found that unless you hack another car up you have to hand fabricate the inner wheel house lip that attaches to the 1/4. So with some careful measuring my dad found that 67-68 firebird/camaro wheel houses are extreemly close. And talking with our bodyman he was surprized that they were as close as they were in resemblance. I'm not replacing the whole wheel house but the lip that attaches to the 1/4 and the bottom front of the wheel house are all that's being used from the firebird wheel houses I bought through AMES Performance. Just my .02, incase anyone was wondering what might work as a replacement since we all know this stuff isn't reproduced.

I don't know what'll work for the 2nd gen AMX/Javelins but I'm sure I'll find out when I get back home, since my brother's AMX has the same issues.