speedo

[1tuffcj]

i'm looking for info on my 727 t/f i baught a autometer speedo (electric). i also baught the converter from manual to electric for the gauge. where is the hole that i put it in the tranny, i use to have a t-150 with dana 20 and the speedo cable went in on the top of the t/c, now i have a 727 t/f. thanks 1tuffcj

[ironman_gq]

should still go into the output housing on the t-case

[1tuffcj]

so does that mean that i have to run a manual speedo with a cable. thanks 1tuffcj

[ironman_gq]

they make an adapter that screws into the t-case where the cable went originally. the adapter turns the mechanical signal into an electric one that can be read by your speedo. 4WD has them part # 52911

[1tuffcj]

thanks for the help, i'll call 4wd tomorrow. 1tuffcj

[1tuffcj]

ok i just went to the 4wd.com site, i saw the part (#52911) it has a male thread i need a female one, i have a dana 20 t/c. does anyone run an electric speedo with a dana 20, where can i get it? thanks in advance, 1tuffcj.

[1tuffcj]

i found a place in cali that has them, this company that only does speedo stuff. thanks for the help guys. 1tuffcj