What size -an fittings and hose for remote oil relocator?

[94xjguy]

I want to go with braided stainless hose for my remote filter setup. Does anyone know what size -an fittings ande hose I need for my 360? I think the plate that bolts to the timing cover are -12 an but not sure. Also, what size for the filter adaptor? Thanks!!

[jeepsr4ever]

-10an fittings or you can adapt a -10an (1/2-npt) to a -12 if your using a external pan pickup in the pan.

[94xjguy]

-10an fittings or you can adapt a -10an (1/2-npt) to a -12 if your using a external pan pickup in the pan.

Ok.So I need 4 -10an to 1/2 npt for your filter adaptor and for the timing cover plate? Is the hose the same size,-10an? Do you guys sell this stuff? Thanks for the reply! Jon.

Ps. I'm not using an external pan pickup.

[jeepsr4ever]

We sell the std hose fittings but not the -an fittings or lines. We may start to do some Russel fittings but nothing is set yet.