OK I have come to the realization that I have a few things I'm probably never going to put to proper use, so... I have the following things for sale
401
Block casting #3198851, boiled, magged,decked, bored and honed +.030
has one thread insert in headbolt hole.
Crank
cleaned, magged, ground .010/.010, balanced with factory damper and TH-400 Flex plate (included)
Rods and pistons
Stock 401 rods, resized with new ARP bolts installed
Speed Pro L2380F pistons with factory anti scuff coating.
Pistons are installed on rods
2 Sets rings
(1) set standard Hastings (1) set Total Seal gapless rings
Rod and main bearings and freeze plugs
Block and Crank have been stored baggeg since the machine work was done a few years ago. Unassembled except for rods and pistons
All above, $1800.00 Negotiable
Heads
1pr. #3216090 magged, bare
$200.00
Edelbrock Torker
#2930 not new but never installed, has been hanging in the garage forever
$150.00
Tranny
TF-727 was working when removed from 72 Javelin
$150.00
Driveshart
72 Javelin with auto
$50.00
Headers
Blackjack(I Think) for Javelin 1 5/8 tubes dogleg ports. used
$50.00
All prices plus shipping, I would prefer pick up as these would be a pain to ship.
Parts are near Cedar Rapids, Iowa