Stainless Dash For 73 CJ5

[redneckjeeper]

Jeeps do you still make the stainless dash for jeeps. I am looking for some stainless steel to redo my dash. I want to make a custom dash for my 73. Dont know of any place except a local steel shop but I talked to them and they wont do anything that I want done to it. Any ideas?????? =D>

[runnamuck]

why not just buy a stainless sheet and start from there. cj dashs are pretty simple.


i'm sure mc could make what you want but that's up to him.

[tomcat]

The holes for the small gauges are easy (holesaw). The cut is also covered by the flange of the instrument.

The big hole for the speedo is pita, the speedo is mounted from the back so you can see the cut.

The studs you can weld from the backside.

The rest is more easy.

[redneckjeeper]

I understand what size holes are for what gauge, read my message and that is that I want to customize the dash. It is not just as simple as getting a sheet and putting holes in it for gauges. I know bulltear use to sell the polished stainless dash with the steering column and glovebox already cut out and that is all I need for now. The rest of it I can do myself.. Thank you..

[jeepsr4ever]

We used to produce the stainless dashboard but for the later jeeps. I dont even think the mounting holes are in the same place.

[redneckjeeper]

Pretty Please

[redneckjeeper]

Jeeps could you sell me the piece of stainless Steel If I give you a pattern for the column and glove box cutout and the mounting holes..If I get it like that I can do the rest of the customizing myself as per the way I want it to be done... Pretty Please

[Patf10]

yea i wish someone made dash panels for the mid year CJ5s, i messed mine up and would love to get one with the steering and glove box done

[Dusty]

Logan's metals will make you a custom stainless steel.

check with this guy i think he's got the connection to them still. be sure you studdy the cad drawings they send you carefully. my dash came out 99% perfect within about an 1/8" on everything one or two holes were an 1/8" off but they were to the nats ass when i re studied thier drawings.

They do do a pre 75 dash we had one done for my buddy by them.


http://www.cyberjeep.com/prodinfo.as...r=LMP-768600R&

[Mudrat]

I enjoy dealing with the Morris folks there in FL. Good group, not always the best price, but customer service is great!!