so I have a leak on my power steering pump on my 360, its the type with the resivoure and pump in one. It's leaking out of the fitting for the high pressure line. Can anyone tell me what the set up is for the o-rings or seals on that line? I see an o-ring on the line and I see what looks like old pieces of some sort of a seal inside the pump part of the fitting.
Also, the pump on this motor and my old 4.0L from the YJ look the same and I'm using my YJ high pressure hose with 360 pump, anyone done this successfully? I think it's definitly an o-ring or seal problem. Thanks.