I am having trouble tighten my stock bracket and was thinking of replacing this with bulltears bracket. I have seached and looked everywhere but can't seem to find a good way of installing it. The pictures I have seen on the bulltear brackets seem to be modified. Does the bracket come with instructions (meaning what holes of the block or intake are being used) and is it a direct bolt on kit?
Are there any pics with it installed top and bottom?
Wade
1980 Jeep CJ-7
T-176
Dana 300
AMC 360
Model 20
Model 30
Here is a older pic of a customers 401
[COLOR=#000000]
Featuring www.StarLabCNC.com[/URL] for CNC plasma machines
1-651-433-3689 TOLL FREE 1-855-433-3689
Mudrats, he bent up a small piece to hold his alternator because he didnt use the spacer ()
[COLOR=#000000]
Featuring www.StarLabCNC.com[/URL] for CNC plasma machines
1-651-433-3689 TOLL FREE 1-855-433-3689
Well, that's because I didn't get a LOWER bracket I had to make oneOriginally Posted by jeepsr4ever
Mudrats, he bent up a small piece to hold his alternator because he didnt use the spacer (
But it works well. There is plenty of adjustment to get the belts running true.
But if you get the full kit from BT it should have all the parts - I got a hand-me-down, almost freebieso I didn't get the lower part.
Which I made out of 1/4" plate to look like this:
And note I also got the underdrive pully's from BT
" “It is said that men go mad in herds, and only come to their senses slowly, and one by one.." -Charles MacKay
"'The trouble with our liberal friends is not that they're ignorant; it's just that they know so much that isn't so.' "
-Ronald Reagan
VOTE
Posting Permissions
Reply With Quote
