I would like to put a tilt wheel in my 1976 J10. What years Grand Cherokee has a column that will fit?
I would like to put a tilt wheel in my 1976 J10. What years Grand Cherokee has a column that will fit?
May the wind be in your face and the sun at your back.
1976 J10
1988 5.0 Mustang
1995 Ford Taurus
1995 Sportster 1200
A chevy column will work. Stuck one in both the CJ and YJ - both tilt wheels!Originally Posted by woodfar51
#20 = we aren't going to make #14 by Valentines day (tomorrow)
I'm disappointed. We were doing good for a couple days
GO VOTE!!!
" “It is said that men go mad in herds, and only come to their senses slowly, and one by one.." -Charles MacKay
"'The trouble with our liberal friends is not that they're ignorant; it's just that they know so much that isn't so.' "
-Ronald Reagan
VOTE
any of the mid 80's FSjs should bolt right in.. they didnt change much on the SJ's .. I used an 83 wag donor for mine..
"A man's got to know his limitation's"
Dirty Harry.
Thanks for the info. Am going on the Pull a Part web site to find what FSJs are on their lot.
May the wind be in your face and the sun at your back.
1976 J10
1988 5.0 Mustang
1995 Ford Taurus
1995 Sportster 1200
you'll need to look for 85 and older, 86 the dash changed, that coloumn has the headlamp dimmer and wiper switch in the turn signal switch.
parting several FSJ'S
Seems that anything I might need for my big 10 will need to come from 85 and older. This will make trips to pull a part much easier.
Thanks for the help.
PS. Would like to hook up with someone in my area,with same type
truck, to share info on found local Jeep treasures.
May the wind be in your face and the sun at your back.
1976 J10
1988 5.0 Mustang
1995 Ford Taurus
1995 Sportster 1200
what about the electrical connections on the column ? i have a 74 waggie and a tilt column from a 82 g-wag is this also a plug and play ?
It is if you cut them off and use waterproof connectors like I didOriginally Posted by 86cj7
" “It is said that men go mad in herds, and only come to their senses slowly, and one by one.." -Charles MacKay
"'The trouble with our liberal friends is not that they're ignorant; it's just that they know so much that isn't so.' "
-Ronald Reagan
VOTE
anything can be made plug and play if you have the wiring diagrams and know how to solder
where would one find a wiring diagram for a 74 and a 82 waggie ?