I am in the process of gettng my heads shaved.
I assume the pushrod length will also need to be adjusted.
So, if I have 0.060" milled, would I need 0.060 shorter pushrods?
79 360 heads, stock bridged rocker setup.
I am in the process of gettng my heads shaved.
I assume the pushrod length will also need to be adjusted.
So, if I have 0.060" milled, would I need 0.060 shorter pushrods?
79 360 heads, stock bridged rocker setup.
Its a Jeep Thing --- No one understands!
"America will never be destroyed from the outside. If we falter and lose our freedoms, it will be because we destroyed ourselves."
-Abraham Lincoln
.024 will get you .5 in compression and .060 will give you 11-12 to 1! 7.800" is the std length pushrod on a 72-91 head
[COLOR=#000000]
Featuring www.StarLabCNC.com[/URL] for CNC plasma machines
1-651-433-3689 TOLL FREE 1-855-433-3689