heads

[1970amx]

How about a billet cnc machined copy of a Brewer head. Maybe a matching tunnel ram or blower intake to go with it.

MC you know you want to !

Rob

[jeepsr4ever]

Working on a casting that can flow those numbers and a intake to match. Thanks though

[1970amx]

Working on a casting that can flow those numbers and a intake to match. Thanks though

And you know that you need a big bore tall deck block to go with these heads and that new billet crank I see you advertising.

:)

[jeepsr4ever]

Just brainstorming a block but nothing in the works yet. A 4.250+ bore should work great with a head flowing in the upper 3's or even lower 4's. I think if we do a block we get rid of the thrust in the cylinder and just make a standard thick wall casting. It is going to take some engineering but I think I am up to the task. With new equipment being brought in we may have a shot at this.