had my machinist balance my 360 amc crank and he said he had to remove alot from the throws is this unusual . using aftermarket rods and oversize pistons correct balancer and correct counterweighted flywheel
had my machinist balance my 360 amc crank and he said he had to remove alot from the throws is this unusual . using aftermarket rods and oversize pistons correct balancer and correct counterweighted flywheel
an amc was my first car and so will also be my last car/jeep
If your piston/rod/bearing/ring set combination is much lighter than stock , then yes. Otherwise, I would question whether he has the knowledge and ability to use his equipment correctly.
Just like going to the doctor, ask for a second opinion.